High-density polyethylene (HDPE) geomembranes are commonly used as an environmental protection liner due to their good chemical and mechanical resistances and low cost. Ultraviolet (UV) radiation is an essential issue in durability studies for pond applications. This study evaluated a 1.5-mm thick HDPE geomembrane exposed to ultraviolet fluorescent radiation for 8760 h in a laboratory and thermoanalytical and physical analyses were conducted towards the understanding of its performance after exposure. According to the results, although the geomembrane maintained the ductile behavior, it showed a 52.48% final decrease in stress crack resistance (SCR) compared to virgin SCR. Moreover, a considerable antioxidant depletion occurred after 8760 h exposure shown by the Std. OIT (standard oxidative-induction time) results, demonstrating a Std. OIT value decrease of 89.19% compared to the virgin Std. OIT. Such a behavior contributed to the susceptibility of thermal effects in the DSC (differential scanning calorimetry) curves and the losses observed in the SCR values, attesting the geomembrane’s oxidative degradation mechanism occurred and changed the polymer’s structure. Highdensity High density (HDPE cost UV (UV applications 1.5mm 15mm mm 1.5 1 5 876 results 5248 52 48 52.48 (SCR Moreover Std standard oxidativeinduction induction time 8919 89 19 89.19 differential calorimetry values s polymers polymer structure 5mm 15 1. 87 524 4 52.4 891 8 89.1 52. 89.

The polymer demand for geotechnical applications has been growing. The geomembrane is a geosynthetic, manufactured, polymeric product and is often specified in environmental projects. Geomembranes started to be used in the 1930s but became more widespread in the 1940s. In the 1970s, geomembranes began to be specified for landfills. Over the past forty years, millions of square meters of HDPE geomembrane have been used in different applications. One of the most important issues for HDPE geomembranes is durability, involving very long-term property requirements. A rupture in the liner that has a geomembrane may provide losses in terms of human lives, environmental impacts, and financial costs. This paper summarizes the mechanisms and concepts involved in the HDPE geomembrane aging and describes the important contributions of laboratory and field studies over the years around the world. Different conditions and exposures drive the HDPE geomembrane behavior, including field temperature conditions and contact with different chemical substances. Accelerated laboratory testing with HDPE geomembrane simulating field boundary conditions is critical to ensure proper use of this geosynthetic in the future.

Membranas impermeabilizantes de polietileno de alta densidade (PEAD) são utilizadas como revestimento em tanques de armazenamento de vinhaça (resíduo da cana-de-açúcar), onde esse resíduo é lançado a temperaturas médias de 80-90 °C. Devido a essas temperaturas elevadas e à acidez do resíduo, essas membranas podem degradar, fissurar e perder a função para a qual foram projetadas vindo a contaminar o solo e o lençol freático. Este trabalho avaliou o efeito da vinhaça em membranas de PEAD após 4 meses de exposição em ambiente controlado. De forma complementar, utilizou-se também um líquido agressivo de pH básico (soda cáustica). Objetivou-se avaliar a resistência da membrana em contato com esses resíduos (ácido e básico). Foram avaliadas as propriedades físicas, mecânicas, teor de negro de fumo e análise termogravimétrica (TGA) para quantificar a degradação das membranas poliméricas frente aos resíduos químicos utilizados. Os resultados mostram, por exemplo, que enquanto a soda cáustica provocou pequena variação nas propriedades físicas, a vinhaça alterou a espessura do material em 7,8%. Analisando-se a imersão na vinhaça, verificou-se uma diminuição média na resistência e deformabilidade (escoamento) de 34% e 23,5%, respectivamente. Houve um aumento médio na rigidez de 7,8% e uma pequena diminuição na resistência média ao rasgo (2,7%).

High-density polyethylene (HDPE) water-proof membranes are used as coatings in vinasse (leachate from sugar cane) storage tanks. The leachate is pumped into the tanks at temperatures of 80-90 °C. Due to these high temperatures and acidity of the waste, these membranes can be degraded, cracked and then loose the function for which they have been designed. This may cause contamination of the soil and groundwater. This study evaluated the effect of vinasse in HDPE membranes after 4 months of exposure in a controlled environment. An aggressive, alkaline pH liquid (sodium hydroxide) was also used. The objective was to evaluate the membrane resistance in contact with acidic and alkaline residues. Physical and mechanical tests, measurement of the carbon black content and thermo gravimetric analysis (TGA) were used to determine degradation of polymer membranes after chemical immersion. While sodium hydroxide resulted caused only minor changes in the physical properties, vinasse induced a thickness change of 7.8%. With immersion in vinasse, an average decrease in strength and deformability (yield) of 34% and 23.5% were measured, respectively. The stiffness increased by 7.8% (average) and the tear strength decreased by 2.7% (average).